USTM

Transition fitting HD-PE/steel with female thread

Transition fitting steel pipe USTM

  • Gas and H2
  • Maximum pressure: Gas 5 bar
  • Material; PE 100 and steel [EN 10278; EN 10277-3 - 11SMn30+C -, thread to EN 10226-1]
  • Safety technology

Note:

Anchored the steel side non-detachable and non-rotatable in the PE.

Self-sealing, patented sealing geometry without elastomeric gasket for use in gas applications.

Other thread dimensions available on request.

Go back Data sheet

PE 100 SDR 11

Maximum permissible working pressure 5 bar (gas)

SKU d Rp B D h L t z Weight kg BX PU
612570 32 1" 61 47 24 112 42 49 0,340 20 1080
612572 40 1 1/4" 70 58 30 121 46 53 0,500 20 800
612574 50 1 1/2" 80 70 30 136 53 60 0,650 15 600
612576 63 2" 94 84 35 141 53 61 1,010 10 400

Other thread dimensions on request

FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes, minimum wall thickness s minimum ≥ 3 mm. Other levels of SDR can be processed on request. Please note the mandatory labels directly on the product. DVGW test mark issued: DV-7501AU2256

Areas of Application

FRIALEN-Transition Fittings USTM are threaded joints as an adaptor from a metal pipe with external thread to a HD-PE pipe. Joint on the part of HD-PE by FRIALEN-Coupler.

Assembly Instructions

The threaded component must be held with a spanner to prevent it twisting in the HD-PE component. The fusion of the HD-PE side takes place by FRIALEN-fusing – leakproof and longitudinally strong.

The installation of the steel and the HD-PE side has to be prepared according to the general installation instructions (see ”Transition Fittings with threaded connection” in ”Assembly Instructions” for ”FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.

Good reasons for using the FRIALEN-USTM:

  • Compact construction

  • HD-PE side with exposed heating element for optimal heat transfer

  • Cold zones at the end to prevent the flow of molten material

  • No holding clamps required

  • Large insertion depth, extra wide fusion zones

  • Steel end permanently anchored in the HD-PE and will not distort

  • Self sealing patented sealing geometry without elastomer seal

  • Additional barcode for tracing back the fitting (Traceability-Coding)

Downloads