T-piece with spigot, SDR 11
T-piece TA SDR 11 with spigot
- Gas, water and H2
- Maximum pressure: Gas 10 bar, Water 16 bar
- Material: PE 100
- Spigot
- Safety technology
- DVGW test mark: DV-8601AU2248 and DV-8606AU2249
With extra long outlet spigot
With extra long outlet spigot
| Reference | d | B | D | h | L | L1 | t | t1 | z | Weight kg | BX | PU |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 616685 | 20/20 | 42 | 29 | 17 | 77 | 95 | 31 | 45 | 8 | 0,040 | 200 | 3200 |
| 616338 | 25/25 | 54 | 36 | 19 | 108 | 110 | 41 | 66 | 13 | 0,080 | 50 | 900 |
| 615719 | 32/32 | 61 | 44 | 22 | 116 | 131 | 39 | 80 | 19 | 0,120 | 35 | 630 |
| 615720 | 40/40 | 70 | 53 | 25 | 146 | 151 | 43 | 88 | 30 | 0,210 | 25 | 450 |
| 615721 | 50/50 | 80 | 67 | 29 | 175 | 186 | 49 | 110 | 38 | 0,358 | 15 | 270 |
| 615722 | 63/63 | 94 | 81 | 33 | 197 | 203 | 56 | 125 | 42 | 0,530 | 10 | 180 |
FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes.
Minimum wall thickness s minimum ≥ 3 mm.
Other levels of SDR can be processed on request.
Please note the mandatory labels directly on the product.
DVGW test mark issued: DV-8601AU2248 and DV-8606AU2249.
Dimension B = Diameter D with contact pin
With standard outlet spigots
With standard outlet spigots
| Reference | d | B | D | h | L | L1 | t | t1 | z | Weight kg | BX | PU | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 616677 | 90/90 | 126 | 116 | 43 | 280 | 219 | 79 | 79 | 61 | 1,250 | 12 | 96 | |
| 616680 | 110/110 | 148 | 141 | 48 | 310 | 247 | 82 | 82 | 73 | 1,950 | 6 | 48 | |
| 616684 | 160/160 | 205 | 203 | 45 | 390 | 326 | 98 | 98 | 97 | 4,950 | 3 | 24 | |
| 1 | 617175 | 180/180 | 228 | 223 | 49,9 | 495 | 389 | 105 | 87 | 143 | 7,960 | 2 | 16 |
| 2 | 617179 | 200/200 | 250 | 247 | 50,3 | 540 | 425 | 112 | 112 | 158 | 10,550 | 1 | 8 |
| 1 | 617183 | 225/225 | 281 | 278 | 61,2 | 590 | 469 | 120 | 120 | 175 | 14,700 | 1 | 8 |
FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes.
Minimum wall thickness s minimum ≥ 3 mm.
Other levels of SDR can be processed on request.
Please note the mandatory labels directly on the product.
DVGW test mark issued: DV-8601AU2248 and DV-8606AU2249.
Dimension B = Diameter D with contact pin
Areas of Application
The FRIALEN-T pieces TA are used for pipe outlets of HD-PE pipelines.
Assembly Instructions
The fusion of the pipe ends with the FRIALEN-TA takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The pipe ends are prepared (removing the oxide layer/cleaning) according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”).
Good reasons for using the FRIALEN-TA:
- Large coupler depth for ease of pipe guiding (no holding clamps required)
- At dim. up to d 63, Length of outlet spigot dimensioned for two fusion operations
- Extra wide fusion zones
- Maximum stability through great wall thickness
- Cold zones at the front side and in the middle of the coupler
- Exposed heating coil for direct heat transmission to the pipe
- Small annular gap for build-up of optimum joining pressure in the fusion zone
- Touch proof electric contacts
- Durable batch marking
- Individually wrapped for dirt protection
- Additional barcode for tracing back the fitting (Traceability-Coding)
get_app
get_app
