Elbow 90°, SDR 11
Elbow W90 SDR 11
- Gas, water and H2
- Maximum pressure: Gas 10 bar, Water 16 bar
- Material: PE 100
- Angle 90 degrees
- Safety technology
- DVGW test mark: DV-8601AU2248, DV-8606AU2249 and DV-8611AU2250
- FM Approvals Class: 1613 (d 63 - d 315)
PE 100 SDR 11
Maximum permissible working pressure 16 bar (water) / 10 bar (gas)
| Reference | d | B | D | h | L | t | z | Weight kg | BX | PU |
|---|---|---|---|---|---|---|---|---|---|---|
| 616686 | 20 | 41 | 28,5 | 16 | 71 | 30 | 12 | 0,040 | 200 | 3200 |
| 612091 | 25 | 54 | 37 | 19 | 73 | 40 | 15 | 0,060 | 60 | 1920 |
| 612093 | 32 | 61 | 43 | 21 | 82 | 44 | 16 | 0,070 | 50 | 1600 |
| 612095 | 40 | 70 | 53 | 29 | 96 | 49 | 21 | 0,110 | 30 | 960 |
| 612097 | 50 | 81 | 66 | 32 | 113 | 55 | 26 | 0,190 | 20 | 640 |
| 612099 | 63 | 96 | 83 | 30 | 136 | 62 | 33 | 0,340 | 10 | 320 |
| 612101 | 75 | 111 | 96 | 37 | 170 | 70 | 53 | 0,600 | 12 | 216 |
| 612103 | 90 | 128 | 115 | 45 | 202 | 75 | 65 | 0,950 | 6 | 108 |
| 612105 | 110 | 150 | 138 | 50 | 234 | 81 | 84 | 1,560 | 10 | 80 |
| 612107 | 125 | 167 | 157 | 44 | 254 | 87 | 89 | 2,030 | 8 | 64 |
| 615276 | 160 | 210 | 207 | 44 | 329 | 92 | 133 | 4,850 | 3 | 24 |
| 615689 | 180 | 229 | 228 | 65 | 354 | 94 | 146 | 5,760 | 3 | 24 |
| 616265 | 200 | 256 | 254 | 54 | 392 | 106 | 159 | 8,557 | 2 | 16 |
| 615690 | 225 | 281 | 280 | 66 | 430 | 113 | 177 | 10,220 | 1 | 8 |
| 616408 | 250 | - | 310 | 80 | 534 | 128 | 251 | 19,100 | 1 | 6 |
| 616409 | 280 | - | 350 | 84 | 621 | 139 | 307 | 27,500 | 1 | 2 |
| 616410 | 315 | - | 396 | 80 | 677 | 150 | 329 | 40,000 | 1 | 2 |
FRIALEN safety fittings can be fused with pipes with SDR levels 11 to 17.6. For W 90 > d 225 separate fusion zones per socket side.
Minimum wall thickness s minimum ≥ 3 mm.
Other levels of SDR can be processed on request.
Please note the mandatory labels directly on the product.
DVGW test marks issued: DV-8601AU2248, DV-8606AU2249 and DV-8611AU2250.
Areas of Application
The FRIALEN-Elbow W90° is used for all changes of direction in HD-PE pipes.
Assembly Instructions
The fusion of the pipe ends with the FRIALEN-Elbows W90° takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The pipe ends are prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.
Good reasons for using the FRIALEN-Elbows W90°:
- Large coupler depth for ease of pipe guiding (no holding clamps required)
- Extra wide fusion zones
- Maximum stability through great wall thickness
- Cold zones at the front side and in the middle of the coupler
- Exposed heating coil for direct heat transmission to the pipe
- Small annular gap for build-up of optimum joining pressure in the fusion zone
- Contacts safe to touch
- Fusion indicator for visual fusion control
- Durable batch marking
- Individually wrapped for dirt protection
- Additional barcode for tracing back the fitting (Traceability-Coding)
get_app
get_app
