90° transition elbow HD-PE/brass with external thread
Transition elbow brass pipe WUN 90
- Water
- Maximum pressure: Water 16 bar
- Material: PE 100 and brass (EN 12168 - CW617N, thread according to EN 10226-1)
- Safety technology
Note:
The brass side is anchored as non-detachable and non-rotatable in PE.
Self-sealing, patented sealing geometry without elastomeric seal for utilisation in water areas.
Default: Brass, gunmetal on request.
Other thread dimensions available on request.
PE 100 SDR 11
Maximum permissible working pressure 16 bar (water)
| Reference | d | R | D | h | L | t | z1 | z2 | Weight kg | BX | PU |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 612120 | 32 | 1" | 47 | 24 | 85 | 42 | 21 | 89 | 0,340 | 20 | 1000 |
| 612140 | 32 | 1 1/2" | 47 | 24 | 94 | 42 | 21 | 93 | 0,470 | 20 | 800 |
| 612127 | 40 | 1" | 58 | 30 | 102 | 46 | 27 | 101 | 0,500 | 15 | 750 |
| 612122 | 40 | 1 1/4" | 58 | 30 | 102 | 46 | 27 | 103 | 0,520 | 15 | 750 |
| 612121 | 40 | 1 1/2" | 58 | 30 | 102 | 46 | 27 | 104 | 0,560 | 15 | 750 |
| 612119 | 50 | 1" | 70 | 30 | 118 | 53 | 30 | 110 | 0,680 | 10 | 500 |
| 612123 | 50 | 1 1/4" | 70 | 30 | 118 | 53 | 30 | 112 | 0,670 | 10 | 500 |
| 612124 | 50 | 1 1/2" | 70 | 30 | 118 | 53 | 30 | 113 | 0,680 | 10 | 500 |
| 612125 | 63 | 1 1/2" | 84 | 35 | 128 | 53 | 33 | 116 | 0,980 | 10 | 320 |
| 612126 | 63 | 2" | 84 | 35 | 128 | 53 | 33 | 121 | 1,000 | 10 | 320 |
Other thread dimensions on request
FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes, minimum wall thickness s minimum ≥ 3 mm. Other levels of SDR can be processed on request. Please note the mandatory labels directly on the product. DVGW test mark issued: DV-7501AU2256
Default: Brass. Gunmetal and V2A on request
Areas of Application
FRIALEN-Transition Elbows WUN 90° are threaded joints as an adaptor from a metal pipe with internal thread to a HD-PE pipe. Joint on the part of HD-PE by FRIALEN-Coupler.
Assembly Instructions
The threaded component must be held with a spanner to prevent it twisting in the HD-PE component. The fusion of the HD-PE side takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The installation of the brass and the HD-PE side has to be prepared according to the general installation instructions (see ”Transition Fittings with threaded connection” in ”Assembly Instructions” for ”FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.
Good reasons for using the FRIALEN-Transition Elbows WUN 90°:
- Compact construction
- HD-PE side with exposed heating element for optimal heat transfer
- Cold zones at the end to prevent the flow of molten material
- No holding clamps required
- Large insertion depth, extra wide fusion zones
- Brass end permanently anchored in the HD-PE and will not distort
- Self sealing patented sealing geometry without elastomer seal
- Additional barcode for tracing back the underground fitting (Traceability-Coding)
get_app
get_app
